hotline 1 : 0812-8527-0182 hotline 2 : 0812-9407-7633 hotline 3 : 0819-1999-6482

QCC-RDM Remote Display

CETCII Critical Instrument

Category : Remotes & Peripherals

Kondisi : NEW

View : 129

hotline 1 : 0812-8527-0182
hotline 2 : 0812-9407-7633
hotline 3 : 0819-1999-6482

The QCC-RDM is a remote display device designed to communicate with the QCC Quad Channel Controller and the FCS Flexible Control System. It displays channel status information and can be viewed from a remote, relevant location such as a refrigeration application where there are two different entrances to the chiller room. The QCC-RDM employs connection loss detection to ensure the information that is displayed is current. Simple configurations such as adjusting the display contrast and setting the Modbus ID and baud rate can be done in the field. Depending on which Controller it is connected to, the QCC-RDM has several display configurations such as: show/not show one or more channels of interest, readings displayed by line scrolling or page scrolling, display one type of gas and not another, display only the top 4 channels in high alarm, etc. The QCC-RDM comes in a standard water / dust tight, corrosion resistant ABS / polycarbonate enclosure with a hinged, secured door.

Key Features

  • View gas readings and system statuses in an alternate location
  • LCD display and LED indicators
  • Internal audible alarm
  • Modbus® RS-485 RTU communication
  • Output for remote strobe and/or horn connection
  • Connection loss detection to ensure accurate information is displayed
  • Standard water / dust tight, corrosion resistant enclosure




ABS / Polycarbonate, corrosion resistant

Copper coated interior to reduce RF interference


272 g / 9.6 oz


127 x 127 x 71 mm / 5.0 x 5.0 x 2.8 inches

User Interface


Backlit, LCD digital display

4-lines, 20-characters/line


Status LED indicators for low, mid, high and fault alarms


Accessed using up, down, enter push buttons



Connection for remote strobe/horn

Audible Alarm

Internal audible alarm


Modbus® RS-485 RTU


Power Requirement

24 VDC, 0.5W, Class 2 (24 VDC supplied by the Controller)


4-conductor shielded minimum 18 AWG stranded within conduit


Thermal, resetting


Operating Temperature

-20°C to 40°C (-4°F to 104°F)

Operating Humidity

15 - 90% RH non-condensing


Conforms to:

CSA-C22.2 No. 205-12, UL508 (Edition 17):2007

EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010

FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RoHS compliant circuit boards