LNK-XT Network Extender Peripheral Device

Category : Remotes & Peripherals

Kondisi : NEW

View : 129

ORDER NOW !!

Hotline 1 : 0822-5102-2483

Hotline 2 : 0857-7556-1612 (Marketing Team)

Hotline 3 : 0812-8847-8408

Description
Specification

The LNK-XT Network Extender peripheral device works as a signal booster allowing transmission and receipt of gas readings over a larger total area. It extends the range of the Modbus® communication network allowing a longer distance between the Controller and the gas detectors. The micro controller quickly passes Modbus information packets from the master side of the LNK-XT to the extension side, seamlessly without interruption. Multiple LNK-XT peripheral devices may be required depending on the size of the application. An LNK-XT is recommended every 2000 ft, approximately every 32 transmitters. Ideal for large applications to create an efficient distribution network of specialized gas detection devices that can communicate over large distances. Compatible with the QCC Quad Channel Controller and FCS Flexible Control System Controller.

Key Features

Extends transmission range of the Modbus® network
Boosts communication signal strength
Power LED indicator
Modbus® RS-485 RTU communication
Standard water / dust tight, corrosion resistant enclosure

Specifications

Mechanical

Enclosure

ABS / Polycarbonate, corrosion resistant

Copper coated interior to reduce RF interference

Weight

400 g / 14 oz

Size

127 x 127 x 71 mm / 5.0 x 5.0 x 2.8 inches

User Interface

Indicator

LED green indicator for power

Input/Output

Communication

Bidirectional

Modbus® RS-485 RTU

Baud Rate: 19,200

Electrical

Power Requirement

24 VDC, 1W, Class 2 (24 VDC supplied by the Controller or RPS-24VDC)

Wiring

4-conductor shielded minimum 18 AWG stranded within conduit

Fuses

Thermal, resetting

Environmental

Operating Temperature

-20°C to 40°C (-4°F to 104°F)

Operating Humidity

15 - 90% RH non-condensing

Certifications

Conforms to:

CSA-C22.2 No. 205-12, UL508 (Edition 17):2007

EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010

FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RoHS compliant circuit boards